Displaying items by tag: Garage Equipment

Hydraulic Press 

10 Ton to 50 Ton Capacity

Cizeta / Italy

 DESCRIPTION

• • • Details

      New series of manual double speed hydraulic hand pump with mobile ram. Thanks to the adjustable ram device, it is possible to make different operations on one piece when the remotion or the same result too difficult and expensive. All the presses have a calibration valve and gauge. All the machines are supplied with nr. 2 “V”blocks and nr. 1 plate. The model with power of 30 and 50 ton are supplied with a which for the hoisting of the working table. All the ram are in special steel treated and chromium platted. The machines are designed and manufactured as per the last CE directives.

      Models

      P.I. 10 B PM power ton. 10
      P.I. 10 N PM power ton. 10
      P.I. 15 PM    power ton. 15
      P.I. 20 PM    power a ton. 20
      P.I. 30 PM    power a ton. 30
      P.I. 50 PM    power ton. 50

     

Transmission Jack 

5 Ton to 15 Ton Capacity

Cizeta / Italy

 DESCRIPTION

• • • Details

      This new series of Hydraulic pit jack for heavy trucks been designed and developed to facilitate dismantling and assembling gear boxes, shafts, clutch unit suspensions and engines for heavy trucks. The lifting is effected by two pedal pump : one for the quick approach and one for the working phase.

      The model F 3000 is extremely low and has the big advantage of the long piston stroke.

      All models have retractable wheels under 900 kg. load. Thanks to his solid and strong structure guarantees stability in all the correct operating positions.

      All models are equipped with an automatic overload safety valve. That equipment is manufactured in compliance with the European Directive 2006/42 CE. Hand assembled.

      Models

      Two stages F 500 P capacity ton. 5

      Three stages F 3000 P capacity ton. 5

      At one stage F 150/P capacity ton. 15

     

Transmission Jack 

0.3 Ton to 1.5 Ton Capacity

Cizeta / Italy

 DESCRIPTION

• • • Details

      Those transmission jacks are designed and manufactured for the use in pit or under two of four post lift, to remove and install engine, gearboxes and heavy parts of the vehicles.
      Solid strong structure, on four wheels, guarantee stability in all the correct operating position.
      All the models are supplied with the suitable plates.

      Models

      F.10 capacity ton. 0.3
      F.13 capacity ton. 0.6
      F.15 capacity ton. 1.0
      F.25 capacity ton. 1.5
      F.50 two pistons capacity ton. 1.5

     

Engine Folding Crane 

0.5 Ton to 2 Ton Capacity 

Cizeta / Italy

 DESCRIPTION

• • • Details

      The “G.L.P.” Crane is designed and made for easy transport and space saving. Thanks to his special combined element frame, can be easily dismantled in few run times. Solid strong structure, made with selected materials, on four wheels, two fixed and two swivels guarantee stability in all the correct operating positions. Four working positions, sliding arms.
      All the models are equipped with a double acting pump, with chromium platted piston.
      Boom descent is controlled by a stand by man valve.

      Models

      GLP 500 capacity kg. 500
      GLP 1000 capacity kg. 1000
      GLP 2000 capacity kg. 2000

     

Engine Stand – 700 to 900 kg Capacity

Ravagiloili / italy

 DESCRIPTION

• • • Details
      

      Engine Stand – 700 to 900 kg Capacity

     

Engine Stand – 300 to 800 kg Capacity

PRC / italy

 DESCRIPTION

• • • Details
      

      Engine Stand – 300 to 800 kg  Capacity 

     

Axle Stand – 1 Ton to 10 Ton 

Cizeta / Italy

 DESCRIPTION

• • • Details
      Supporting stand for car and trucks. Extension with pin holes and thrust bearing.

     

HYDRAULIC BOTTLE JACK 

SHORT RANGE AND HIGH LIFT SHORT RANGE WITH END STROKE VALVE

- 3 Ton To 50 Ton -

Cizeta / Italy

 DESCRIPTION

• • • Details
      A complete range of hydraulic bottle jacks for any kind of lifting. Solid, strong structure, and a wide support base, guarantee stability in all the correct operating positions. Equipped with an adjustable extension screw with safety stop, the jack is also furnished with an automatic end stroke safety valve.
      All the models are supplied with the operating handle.
      Models
      B.30 capacity ton. 3
      B.30/P capacity ton. 3
      B.50/P capacity ton. 5
      B.30/V with screw capacity ton. 3
      B.50/V with screw capacity ton. 5
      B.50/B with screw capacity ton. 5
      B.80 with screw capacity ton. 8
      B.100 with screw capacity ton. 10
      B.120 with screw capacity ton. 12
      B.150 with screw capacity ton. 15
      B.200 with screw capacity ton. 20
      B.250 with screw capacity ton. 25
      B.300 with screw capacity ton. 30
      B.400 with screw capacity ton. 40
      B.500 with screw capacity ton. 50

     

PNEUMATIC TROLLEY JACK 

HEAVY DUTY – FOR TRUCK & OTR 

Cizeta / Italy

 DESCRIPTION

• • • Details
      Designed and developed to make east lifting of great capacity.
      Strong body and large surface ensure the maximum stability in all working conditions. Provided with safety device to avoid the descent in case of air pressure lack. Supplied with automatic overload safety valve. Descent controlled by a pneumatic vacuum system.
      Three position adjusting handle. Working pressure 8 – 10 bar. Air inlet ¼” gas. The model O.P. 203 and O.P. 154 are supplied with two extension plates.
      Models
      O.P. 203 CAP. TON 60 -30 -20
      OP 114 CAP. TON 60 -30 -20 -11
      OP 154 CAP. TON 75 -40 -30 -15

     

HYDRAULIC TROLLEY JACK 

Low Profile – 2 Ton 

Cizeta / Italy

 DESCRIPTION

• Details
  New hydraulic low profile trolley jack for lifting stated capacity loads with low profile space.
  Fitted with four nylon wheels; two fixed and two swivel, guarantees stability in all the correct operating position.
  All the models are supplied with pedal for release of the loads, removable handle for quick and easy transport.
  Equipped with automatic end stroke safety valve and overload valve. Available also with rubber plate.
  Models
  CZ 20/B capacity on the plate ton. 2 and on the vehicles ton. 4
  CZ 20/B D.W. capacity on the plate ton. 2 and on the vehicles ton. 4